基于车载激光点云的街景立面自动提取     

耿雨馨  钟若飞  彭宝江 《地球信息科学学报》2018,20(4):480-488

街道景观图是城市规划设计和城市管理的重要参考依据,车载点云数据能够提供沿街建筑的三维点信息,精度高,覆盖范围广泛,为街景立面整治提供了新的解决方案。为此,本文提出一种适用于车载点云的街景立面的自动提取方法,提取立面点云的具体步骤为：对原始数据去噪滤波;选取非地面点构建规则格网并二值化,依据语义特征筛选出建筑物点云;用POS数据拟合直线段帮助选取参考向量与参考平面;计算点云到参考面的距离,按距离分类点云数据,并对前述步骤中未分类点另行提取,合并面点集得到以沿街建筑物立面为主的街景立面点云。为了验证这一方法的可行性和有效性,采用点云数据进行实验,实验结果表明本方法在一定程度上提高了数据处理效率,能得到较理想的结果。  相似文献   

基于区域监测站的BDS定轨策略分析     

王乐  黄观文  张勤  燕兴元  秦志伟  王利  崔博斌 《大地测量与地球动力学》2018,38(5):497-503

围绕影响轨道精度和实时性的5个要素（模糊度分类固定、测站数量、定轨弧长、太阳光压模型和多系统组合）展开研究，得出区域测站分布下的定轨优选策略。实验表明，选取中国区域27个均匀分布的地面区域监测站，利用72 h弧长观测数据，采用ECOM 5参数简化太阳光压摄动模型、BDS/GPS双系统联合定轨可达到较好的精度，其中GEO卫星轨道精度约291 cm，IGSO/MEO卫星轨道精度优于11 cm。若BDS单系统采用上述策略进行定轨，也可达到GEO卫星299 cm和IGSO/MEO卫星14.4 cm的近似等价定轨精度。  相似文献   

基于斩波轮技术的K波段接收机噪声校准研究          下载免费PDF全文

王凯  王洋  陈卯蒸  段雪峰  闫浩  马军  陈晨雨  曹亮 《天文学报》2020,61(1):1

接收机是射电天文中用于探测微弱射电信号的重要接收设备.接收机的强度校准就是将接收机对射电源的响应转换为天文意义上的流量密度.常规方法就是使用经典的冷热负载法,将接收机自身的强度响应转换为一个等效的温度值,之后再据此对射电源做进一步标定.通过搭建基于斩波轮技术的K波段接收机强度校准平台,使用斩波轮法测试K波段常温接收机的噪声温度,并与传统冷热负载法的测试结果进行比对.结果显示,在晴好天气条件下,斩波轮法在30°、90°仰角下噪声温度的最大测试误差为7.5%和8.4%,可以很好地应用于实际噪声温度测试中;但在5°仰角测试中,由于过低仰角引入了地面噪声,使得斩波轮法的测试误差上升至20%–30%之间而无法使用.希望在此基础上进一步开展K波段天空亮温度的理论计算与实测,从而完善斩波轮技术的应用,使之可以满足在不同气象条件下的噪声校准测试需求.  相似文献   

利用短期静态PPP结果反演海潮负荷位移     

魏国光  王琪洁  彭葳  郭良琦 《大地测量与地球动力学》2019,39(6):607-612

采用香港11个GPS测站的观测资料进行1 h、2 h、3 h和4h静态PPP解算，获得4组PPP坐标序列，利用调和分析求取11个测站处8个主要分潮的负荷位移参数（振幅和相位），将其与海潮模型计算的负荷位移参数进行对比，并比较分析PPP反演值与海潮模型值改正海潮负荷信号的效果。结果表明，垂直和水平方向上，不同PPP结果反演8个分潮的负荷位移分别具有约5 mm和7 mm的差异；PPP反演8个分潮垂向负荷位移优于全球海潮模型，但水平方向上的反演效果稍弱。  相似文献   

A high-precision time–frequency analysis for thin hydrocarbon reservoir identification based on synchroextracting generalized S-transform     

Ying Hu  Hui Chen  Hongyan Qian  Xinyue Zhou  Yuanjun Wang  Bin Lyu 《Geophysical Prospecting》2020,68(3):941-954

Improving the seismic time–frequency resolution is a crucial step for identifying thin reservoirs. In this paper, we propose a new high-precision time–frequency analysis algorithm, synchroextracting generalized S-transform, which exhibits superior performance at characterizing reservoirs and detecting hydrocarbons. This method first calculates time–frequency spectra using generalized S-transform; then, it squeezes all but the most smeared time–frequency coefficients into the instantaneous frequency trajectory and finally obtains highly accurate and energy-concentrated time–frequency spectra. We precisely deduce the mathematical formula of the synchroextracting generalized S-transform. Synthetic signal examples testify that this method can correctly decompose a signal and provide a better time–frequency representation. The results of a synthetic seismic signal and real seismic data demonstrate that this method can identify some reservoirs with thincknesses smaller than a quarter wavelength and can be successfully applied for hydrocarbon detection. In addition, examples of synthetic signals with different levels of Gaussian white noise show that this method can achieve better results under noisy conditions. Hence, the synchroextracting generalized S-transform has great application prospects and merits in seismic signal processing and interpretation.  相似文献   

Potential of legacy 2D seismic data for deep targeting and structural imaging at the Neves–Corvo massive sulphide-bearing deposit,Portugal     

George A. Donoso  Alireza Malehmir  Nelson Pacheco  Vitor Araujo  Matthew Penney  Joao Carvalho  Bill Spicer  Steve Beach 《Geophysical Prospecting》2020,68(1):44-61

Seismic methods are becoming an established choice for deep mineral exploration after being extensively tested and employed for the past two decades. To investigate whether the early European mineral-exploration datasets had potential for seismic imaging that was overlooked, we recovered a low-fold legacy seismic dataset from the Neves–Corvo mine site in the Iberian Pyrite Belt in southern Portugal. This dataset comprises six 4–6 km long profiles acquired in 1996 for deep targeting. Using today's industry-scale processing algorithms, the world-class, ca. 150 Mt, Lombador massive sulphide and other smaller deposits were better imaged. Additionally, we also reveal a number of shallow but steeply dipping reflections that were absent in the original processing results. This study highlights that legacy seismic data are valuable and should be revisited regularly to take advantage of new processing algorithms and the experiences gained from processing such data in hard-rock environments elsewhere. Remembering that an initial processing job in hard rock should always aim to first obtain an overall image of the subsurface and make reflections visible, and then subsequent goals of the workflow could be set to, for example understanding relative amplitude ratios. The imaging of the known mineralization implies that this survey could likely have been among one of the pioneer studies in the world that demonstrated the capability of directly imaging massive sulphide deposits using the seismic method.  相似文献   

Approximate traveltime inversion in downhole microseismic monitoring     

Sergey Yaskevich  Anton A. Duchkov  Yuriy Ivanov 《Geophysical Prospecting》2020,68(3):918-925

In downhole microseismic monitoring, accurate event location relies on the accuracy of the velocity model. The model can be estimated along with event locations. Anisotropic models are important to get accurate event locations. Taking anisotropy into account makes it possible to use additional data – two S-wave arrivals generated due to shear-wave splitting. However, anisotropic ray tracing requires iterative procedures for computing group velocities, which may become unstable around caustics. As a result, anisotropic kinematic inversion may become time consuming. In this paper, we explore the idea of using simplified ray tracing to locate events and estimate medium parameters. In the simplified ray-tracing algorithm, the group velocity is assumed to be equal to phase velocity in both magnitude and direction. This assumption makes the ray-tracing algorithm five times faster compared to ray tracing based on exact equations. We present a set of tests showing that given perforation-shot data, one can use inversion based on simplified ray-tracing even for moderate-to-strong anisotropic models. When there are no perforation shots, event-location errors may become too large for moderately anisotropic media.  相似文献   

Separation of magnetic anomalies into induced and remanent magnetization contributions     

Jamaledin Baniamerian  Shuang Liu  Xiangyun Hu  Maurizio Fedi  Mahak Singh Chauhan  Mahmoud Ahmed Abbas 《Geophysical Prospecting》2020,68(7):2320-2342

Inversion of magnetic data is complicated by the presence of remanent magnetization, and it provides limited information about the magnetic source because of the insufficiency of data and constraint information. We propose a Fourier domain transformation allowing the separation of magnetic anomalies into the components caused by induced and remanent magnetizations. The approach is based on the hypothesis that each isolated source is homogeneous with a uniform and specific Koenigsberger ratio. The distributions of susceptibility and remanent magnetization are subsequently recovered from the separated anomalies. Anomaly components, susceptibility distribution and distribution of the remanent and total magnetization vectors (direction and intensity) can be achieved through the processing of the anomaly components. The proposed method therefore provides a procedure to test the hypotheses about target source and magnetic field, by verifying these models based on available information or a priori information from geology. We test our methods using synthetic and real data acquired over the Zhangfushan iron-ore deposit and the Yeshan polymetallic deposit in eastern China. All the tests yield favourable results and the obtained models are helpful for the geological interpretation.  相似文献   

Socio-hydrological framework for investigating farmers’ activities affecting the shrinkage of Urmia Lake; hybrid data mining and agent-based modelling     

Parsa Pouladi  Amir Molajou  Mohammad Hadi Afshar 《水文科学杂志》2020,65(8):1249-1261

ABSTRACT

Developing a general framework to capture the complexities associated with the non-linear and adaptive nature of farmers facing water resources scarcity is a challenging problem. This paper integrates agent-based modelling (ABM) and a data mining method to develop a hybrid socio-hydrological framework to provide future insights for policy-makers. The data associated with the farmers’ main characteristics were collected through field surveys and interviews. Afterwards, the association rule was employed to discover the main patterns representing the farmers’ agricultural decisions. The discovered patterns were then used as the behavioural rules in ABM to simulate the agricultural activities. The proposed framework has been was applied to explore the interactions between agricultural activities and the main river feeding the Urmia-Lake, Iran. The outcomes indicate that farmers’ acquisitive traits and belongings have significant impacts on their socio-hydrological interactions. The reported values of the efficiency criteria may support the satisfactory performance of the proposed framework.  相似文献   

Detection of coffee berry necrosis by digital image processing of landsat 8 oli satellite imagery     

《International Journal of Applied Earth Observation and Geoinformation》2020

Coffee berry necrosis is a fungal disease that, at a high level, significantly affects coffee productivity. With the advent of surface mapping satellites, it was possible to obtain information about the spectral signature of the crop on a time scale pertinent to the monitoring and detection of plant phenological changes. The objective of this paper was to define the best machine learning algorithm that is able to classify the incidence CBN as a function of Landsat 8 OLI images in different atmospheric correction methods. Landsat 8 OLI images were acquired at the dates closest to sampling anthracnose field data at three times corresponding to grain filling period and were submitted to atmospheric corrections by DOS, ATCOR, and 6SV methods. The images classified by the algorithms of machine learning, Random Forest, Multilayer Perceptron and Naive Bayes were tested 30 times in random sampling. Given the overall accuracy of each test, the algorithms were evaluated using the Friedman and Nemenyi tests to identify the statistical difference in the treatments. The obtained results indicated that the overall accuracy and the balanced accuracy index were on an average around 0.55 and 0.45, respectively, for the Naive Bayes and Multilayer Perceptron algorithms in the ATCOR atmospheric correction. According to the Friedman and Nemenyi tests, both algorithms were defined as the best classifiers. These results demonstrate that Landsat 8 OLI images were able to identify an incidence of the coffee berry necrosis by means of machine learning techniques, a fact that cannot be observed by the Pearson correlation.  相似文献